THE ADVANTAGES OF RMF SYSTEMSLess malfunctions The tolerances between moving parts in servo valves and proportional valves are constantly reducing. The result is that even the smallest amounts of silt can cause damage to the system. RMF filters remove this silt. Protection of expensive main stream filters RMF Systems filters are applied in By-pass or Off-line configurations and constantly clean the oil from reservoir. The oil which reaches the main stream filter is therefore cleaner and allows longer usage life of this expensive filter. The main stream filter then acts primarily as an emergency filter. Less frequent oil changes Increasingly strict environmental lawn in the area of oil changes, oil storage and the disposal of used oil lead to corresponding cost increases. RMF filters mean less oil changes, and therefore less costs. Extended usable life of the oil Frequent oil changes are generally the result of chemical deterioration of the oil caused by the oil oxidation process. This process is brought into action by the presence of silt. If water is also present, this acts as a catalyst and the oxidation process is accelerated. RMF filters remove silt AND water from the oil. Less machine down time Reduction of defects caused by worn components and less frequent oil changes mean an increase in production time. |
RMF CHARACTERISTICS IN SHORTThe oil filters have: - A filter fineness of 0.5 micron - Large particle collection capacity - High filtration capacity due to depth effect - Large water absorption capacity - A full range of filter elements Measuring points To facilitate quality control of the oil, the RMF By-pass and Off-line oil filters are equipped with two quick connect measuring points to which a particle counter can be attached. This Offers the possibility of measuring the oil cleanliness level on-site and under working conditions. The measuring points also allow oil samples to be drawn for external analysis. The solution RMF Systems offer the most complete and efficient filter series available today. RMF Systems is The solution to your contamination problems : simple to fit, equipped with extremely efficient filters and offering the opportunity for simple control of oil cleanliness. |
RMF Systems filters: - Do not adversely affect viscosity or additives - Do not remove additives - Reduce the oxidation process - Reduce the forming of acids - SAVE COSTS
|